East Garden Power Tools ET1105 18V 1500mA.h Ni-cd battery Chainsaw 10’Bar and Chain cordless chainsaw rechargeable Electric Saw (Green)

ET1105 18V CHAINSAW

DC voltage: DC 18V Battery: Lithium, 1.5Ah Charging time: 3-5hours Running time: 20-25mins Speed: 2.9m/s Maximum cutting length: 250mm Total Length: 650mm Oil capacity:150ml Auto oil supply Quickly fasten system

Step 1:

Check that the distance between the guide plate and the link of the chain is 2-3 mm (as shown above).

Step 2:

If the distance is not 2-3 mm, adjust the locking hand wheel (as above)

Step 3:

Adjust the locking wheel, confirm that the distance is about 2-3 mm, firmly tighten the locking hand wheel (as shown in the figure above).

Step 4:

Please be sure to check whether the oil level in the oil tank of the machine is below the scale value. If it is below, please fuel the oil tank. Otherwise, it is easy to cause the machine to heat up and damage the machine.

Step 1: auxiliary handle Step 2: press the self-locking push button (as above) Step 3: then press the rocker arm of the main switch and the machine starts to operate (as above)

Release the rocker arm of the main switch and the machine will stop working (as above)

1. Adjust the chain and baffle to the direction shown in the figure 2. Fasten the chain into the guide plate 3. Completion drawing of chain and guide plate installation 4. Loosen lock handwheel 5. Remove the sprocket guard 6. Install the chain on the sprocket, with the teeth facing the same direction as the guide mark of the chain